Dubai It Band – Whoop

To find your Apple Watch case size, check the back of your watch or open the Watch app on your iPhone. Once you confirm your size, use the table below to identify your model.

Once you confirm your case size, you're good to go — your strap has been automatically matched above.

How do I attach my band?

The Whoop 4.0 models and below are fully supported. No need to select a size — we've got you covered!

Whoop 3.0/4.0 models are supported — just complete your order, no size selection needed. Whoop 5.0 is also available now.

How do I attach my band?

Not sure which Samsung watch you have? Use the table below to identify your model and check if it's compatible.

Tip: Galaxy Watch 4/5/6/7 (including Classic) use a 20mm lug. Galaxy Watch 8 and 9 use Samsung's Dynamic Lug, and the Ultra models use a wider version of it, so pick your exact model from the dropdown on the product page and the right connector ships free. Galaxy Watch 3 (45mm) and Gear S3 use a standard 22mm lug and can also use Universal Quick Release → 22mm.

How do I attach my band?

Not sure which Huawei watch you have? Use the table below to confirm if it's compatible with your strap.

If your model is listed as Compatible, it works with your strap.

How do I attach my band?

Use the table below to check if your Garmin model is compatible. Both QuickFit and standard Quick Release fittings are supported. Quick Release covers the full collection; QuickFit and the smaller 18mm sizes are made in a selected range of designs.

If your Garmin uses Quick Release or QuickFit bands, it's fully compatible.

How do I attach my band (QuickFit)?

How do I attach my band (Quick Release)?

Check your Suunto watch below. If it's compatible, select "Universal Quick Release" on the shop page, then choose the matching band size shown.

If your model is marked Yes, select Universal Quick Release and choose the size listed.

How do I attach my band?

Check your Amazfit model below. If it's compatible, select "Universal Quick Release" on the shop page and choose the correct size.

All compatible models require choosing "Universal Quick Release" and the correct lug width.

How do I attach my band?

Check your Xiaomi model below. If compatible, select "Universal Quick Release" on the shop page and choose the correct size.

If your model is listed as compatible, select Universal Quick Release and choose the right size from the dropdown.

How do I attach my band?

Our Universal Quick Release bands also work with most analogue and traditional watches that use standard spring bars. If your watch has a 20mm or 22mm lug width, our bands will fit.

How to check your lug width: Measure the gap between the two lugs (the metal prongs where the strap connects to the watch case). The most common sizes are 20mm and 22mm.

Heads up: A few popular watches look like they should fit but don't. Scroll to the bottom of this page (Incompatible Devices) to see the full list — including the Tissot PRX, Rolex Submariner 41mm (2020+), Orient Bambino, and most standard Swatch models.

Note on Daniel Wellington: DW originals use a slip-through 1-piece NATO-style strap. Our 2-piece quick-release bands will fit (the case has standard spring bars) but sit slightly differently than the stock strap.

And many more! Any analogue watch with a standard 20mm or 22mm lug width will work with our bands.

Do I need any tools?

To remove the original strap from your analogue watch, you will need a spring bar tool (a small fork-shaped tool used to compress the spring bars in your watch lugs). This is a one-time step. Once the original strap is off, our bands slide right in using quick-release spring bars, no tools needed. After that, you can swap between zamani bands in seconds by hand.

Good news: we make our own. Grab the zamani Watch Pin Tool →

When ordering, select "Universal Quick Release" as your watch type and choose the correct lug width (20mm or 22mm).

How do I attach my band?

The following devices are currently not supported by our straps:

Smartwatches we don't fit

Analogue watches that look like they should fit but don't

These watches have non-standard lug widths or integrated bracelet designs. A 20mm or 22mm spring-bar band will not seat correctly.

Swatch lineup — only the MoonSwatch fits

Among Swatch's entire family, only the Omega x Swatch MoonSwatch uses standard 20mm spring bars (and is listed in the compatible section above). All other Swatch lines use non-standard widths or proprietary notched-strap retention:

If your watch is on this list, our bands will not fit. If your watch isn't listed here or above and you're not sure, measure the gap between the lugs — if it's exactly 20mm or 22mm and uses standard spring bars, you're good.

Follow the short videos below to set your wallpapers.

Phone wallpapers

Watch wallpapers